14 września 2013
9/14/2013 Chaos, Demon, gry bitewne, miniatures, models, Scibor Monstrous Miniatures, wargames, Warhammer 40.000 No comments
Today again we will emerge ourselves in the fantastic world of Scibor Monstrous Miniatures. Lately there is a great rush of miniatures from Scibor fantasy department, one we will review today is not newest but it still deserve our attention.
Big Fat Uncle is an awesome great demon and when I say great I mean enormous, gigantic and massive. It measures over 80mm from the base to the top, over 60 mm in diameter and comes in 3 main parts, so assembly is very simple. What we get after gluing and trimming any miscasts is a very unique model that is as much beautiful sculpture work as intentionally ugly.
Demon body is heavily mutated by warped and wicked powers of Chaos. It gives an impression of sluggish behemoth covered in slime and sores. In my mind it bears resemblance to Great Unclean One and plague demons of Nurgle, off course not intently. You can easily use this miniature in every Chaos/Demon army or collection, either fantasy or science fiction in nature.
A main portion of this model is a massive body containing mutilated torso, grotesque arms and legs, mutated head and really disturbing back. From the top, its head is low almost at the level of shoulders and its open mouth reach as far as to the middle of the chest. In the wide gap we can clearly see rows of discussing teeth and meaty inside of the demons mouth.
Above the mouth are oversized nostrils and sunken eyes with large wrinkles under it. When we look on its face we can fell a very really unease. T make matters more horrible head of the demon has one additional element that is separate, a big, curly, long and fat larva like tongue. You can almost see a toxic or corrosive saliva dripping from it. In short its head is wonderfully ugly.
When we take a closer look to a demon torso we can clearly see a disease, gluttony, mutations and chaos at work. Its fat and muscles are warped and oversized, its whole outline looks like a giant blob. From the shores and open wound a fluids are oozing, meet and intestines are pricing the sick layer of skin and coming open, and from multiples gaps in demons body human hands and heads are visible trying to reach out too free themselves or grab someone who will soon share their damned fate.
Its back is in similar state of decay but an upper part of its spine is clearly protruding from beneath rooting flesh. As this isn’t enough at the lower end of demon back there is something like… a big anus with fluids and partly dissolved human parts leaking from it, truly sickening sight.
Big Fat Uncle legs and arms are also fat and decayed and are mostly closely tight to demon body, We can see crocked toenails and fingernails, one leg is almost totally invisible under the mas of oversized body. Left hand is last part of this miniature and it has to be glued to the rest of the demons body.
Scibor sculptured it in the process of gipping and squishing a life from some poor old human soul. What is cool is that in my opinion that person can be easily converted with parts form Warhammer (exchange of head and arms) to get more Battle of 40k experience. Either way on that pour persons face we can see a look of true despair and fear of someone that know that there are worse fate than simply death.
The whole Big Fat Uncle set is amazing in its details, seize and deliberate ugliness. In my opinion it is a really unique miniature and good challenge for yours painting skills. We got loot of surface, different “materials”(skin, bones, muscles, humans and other… demonic “stuff”). It is not cheap model, but in my opinion it is totally worth the money. Simply amazing.
8 września 2013
9/08/2013 No comments
we can order one of the four sets of battle bases named Wraithstone through the company's website. The smallest are twenty-five millimeters in diameter, the next larger size is 40 millimeters, another 60 millimeters, and the largest elliptical bases are 120 millimeters in diameter. These products are not cheap, but they are the perfect complement to any Eldar army. This does not mean , however, that those accessories won’t fit into the collection of other figures, I'm sure that Wraithstone bases can be used in many situations.
When looking at the smallest of the reviewed bases (25 mm in diameter) we can see that the manufacturer prepared as many as 12 different designs. Each of them is unique and differs significantly from the others, so we don’t have a feeling of repetitiveness.
25 mm Wraithstone bases are decorated with carvings , runes , crystals and various themes that can be related to Eldar. The product is successfully made to resemble a surface crafted from the material called wraithstone. Both the quality of the resin and crafting is surprisingly high and it’s hard to find any air boules, miscasts or other imperfections. I think these bases are perfect for most standard units in the Eldar army, the only thing that can be upsetting is uneven footing. Some of the 25 mm designs have lot of differences in ground levels and it can be challenging to successfully place the miniatures . On the other hand, it allows for greater diversity among individual army units.
The 40-millimeter based are similar to their smaller counterparts, but they come in six different patterns. These accessories have smaller change in elevation high, which allows for easy positioning of the models. These bases are large enough, so they can accommodate larger units, such as unique characters such as Autarch, Wraithguards or other special models.
Since its creators (concept by Sasha Tynan and sculpted by Sebastian Makowski) had more to work with, 40 mm bases are an interesting study of Eldar creations. Most of those bases have two or three different elevation heights, definitely more carvings and gems. Most of the shapes and ornamentations are created by delicate and rounded lines, that intersect the base in a very elegant way, creating interesting and harmonic designs.
In case of 60 millimeter Wraithstone Battle Bases have two very different forms, but both are extremely aesthetically pleasing. One of them is simpler and the second much more complex. The first one does not have only one distinctive elevation (there is a second small elevation), which allows for easy placement of figures such as Wraithlord or any other large military units (for example walkers). Thanks to two (or even three) distinctive height levels we can position our miniature “flatly” on both legs using one flat surface or choose more “kneeling” or in a move position by using the difference in height.
The second base has been created with more images and details such as runes, carved lines and sigils. It’s more difficult to pose your model on that base but it is definitely artistically pleasing. What we see first is a beautiful and simply sculptured yin and yang sign. Opposing it there is a big gem (soulstone). At the lower base levels there are carvings and five strange “half spheres” sticking out from the surface. Design such as this is difficult to utilize, but it can give very satisfactory results when used to set a model properly.
Personally, I think the most interesting piece from the Wraithstone Bases set is the elliptical 120 mm battle base. It is fit for all the biggest models, you can safely put tanks, flyers, other vehicles and even Wraithknight on it (it’s a base created almost perfectly for that grand miniature). More importantly, it is almost ideal for a diorama, presenting some alien combat struggle or most important Eldar units together (for example Phoenix Lords).
That base is mostly flat (there are elevations but with not any significant height), so positioning and gluing miniatures should not cause any serious problems. At the same time, the battle base is strongly decorated in a way that produces a very positive aesthetic experience.
The entire Wraithstone battle bases series created and sold by Micro Art Studio looks fantastic. The creators of hose accessories were able to strike a balance between usability and ornamentation. Simple and easy aesthetic designs will strike a chord in the soul of any Eldar army collector. It is worth mentioning these bases in connection with the recent launch of the new Eldar miniatures and codex released by Games Workshop. For me Wraithstone bases are a perfect complement accessories for old and new Eldar models.